High-performance Lithium Battery LED Cordless Mining Cap Lamp
• Target light output minimum 6000 lux measured at 1 meter for a 12-hour shift.
• 4 push buttons – 1 push button to control the light, 1push button to control OLED display and 2 side push buttons to initiate emergency assistance request.
Unique to the cordless model is a back-lit display screen with battery life indication,
providing clear warning when recharge is required.
Feature
* Compact design
* Long life li-ion battery
* Easy push-button operation
* Anti-static durable housing
* Water resistant (IP68)
* Electrical short circuit protection
Specification :
| Light source |
1pcs main light and 2pcs auxiliary lights |
| Battery capacity |
6.8Ah |
| Rated Voltage |
3.7V |
| Main light current |
300mA |
| Power of the main light |
1W |
| Illuminous |
125LUM |
| Brightness of the main light |
6000lux |
| Life span for main LED |
100000hours |
| Battery cycles |
1200 cycles |
| Working time |
20 hours |
| 3 Levels Light |
Strong light- auxiliary lights- SOS |
| Weight |
210g |
| Water-proof grade |
IP68 |
| |
|
| |
|
|
Correct Use:orrect Use:
The BRANDO cordless cap lamp is a mobile miner’s safety lamp.
The device is attached to a safety helmet, designed to accommodate front mounted attachments, and its power source, battery and housing, is integreted into the cap lamp housing.
The device is primarily designed for underground mining activities and emergency services.
CAUTION:
This product supports life and health in an underground environment.
Inappropriate use, maintenance or tampering may affect the function of the device and
therefore compromise the product’s ability to support life and protect against harm
ATTENTION:
When using the BRANDO Cordless Cap Lamp the following safety instructions must be observed:
• Device shall be operated by qualified personnel.
• Before each use, check the functionality of the device.
• Be aware of the procedures for handling electrostatically sensitive electronics, which include BRANDO cap lamps.
• This device contains electrostatically sensitive components. Do not open or repair the device without using appropriate electrostatic protection.
• Be aware of the warranty regulations.
• Do not charge in hazardous areas.
• Charge only with approved charging devices.
Waterproof, Fireproof and Drop Resistance Cap Lamp
Charger input power:
|
USB Charger: 5 VDC @ 2 Amp
Single Charger (optional): 12VDC – 24VDC @ 2 Amp
Charger Rack Available
|
|
Application of Brando Miner Lamp
Suitable for explosive gas environment zone 1, zone 2 locations;
Suitable for combustible dust environment 20 zone, 21 zone and 22 zone places;
Suitable for A, II B, II C explosive gas environment;
Suitable for: indoor, outdoor 1.8-3.5 meters in height;
